2016年4月8日 星期五

Chris Chen 的 MPU 測試 (Home made MPU Testing Report)

Chris Chen 自製了一台水晶版的 MPU (Magrav Power Unit,斥引力場能源裝置)。
Chris Chen from Taiwan had made a crystal version MPU (Magrav Power Unit) by himself.

他參考了〈MPU 的建議測量方式〉,並用下圖的連接方式去測試他的 MPU:
He is using the configuration in the following picture to test his MPU:


此配置方式與原廠說明書(下圖 B)的方式相同。
Which is the same configuration to the official MPU user's manual (Fig. B):


以下是他所發佈的測試影片:
Here is the MPU testing video:


在這影片的最後一次測試中,我們可以看到,電暖爐的消耗功率約為 545 瓦,吹風機約為 1356 瓦,而市電的消耗功率約為 116 瓦。即整體 116 瓦的電力輸入與 1901 (545+1356) 瓦的電力輸出。
In the final test in this video, we can see the heater is consuming 545 watts, the hair dryer is consuming 1356 watts and the whole system is draining only 116 watts from the power grid. Which is 116 watts input and 1901 (545+1356) watts output in total.

也就是說,透過這樣的配置,他省了約 1785 (1901-116) 瓦的電力。也可以說是達到了約 93 %的節電效率。
Which means he is saving 1785 watts total, approximately 93% power reduction.

2016/04/19 更新:
April 19th,2016 Update:

最近經過一番檢查,我們發現我們的測量結果有誤,我們的瓦特計所顯示的數值並不正確。
Recently, we found that our measuring result is actually incorrect. The watt meter is not showing the right value.


雖然這個瓦特計的測量瓦數上限是 3000W,兩電器的消耗功率總和 (1901W)看似沒有超過上限,但我們沒有並注意到它的電流上限是 15 A。這表示,它只有在 220V 的電壓環境下,才可以測量達 3000W。而台灣的電壓規格是 110V ,所以這表示它的測量上限最高只有到 1500W 左右。
Although the maximum power limit of the watt meter is 3000W, but we didn't notice that the current limit is 15A. Which means when we use 110V as the power supply ( which is the standard voltage in Taiwan) we can only reach around 1500W.

根據我們的測試,當負載超過約 1500W 的時候,瓦特計就會顯示不正確的,比正常還小的數值。因此目前我們還在重新測試這個 MPU,嘗試取得正確的測量結果。
In our testing, we found that we are getting incorrect readings from the watt meter when we exceed the limit of 1500W. We are currently arranging a retest for the MPU to get the correct result.

延伸閱讀:

7 則留言: